Shelly Touch Screen Wall Display and Shelly H&T (Black) Setup Guide

Shelly Touch Screen Wall Display and Shelly H&T (Black)

  • Tools required:
    • Smartphone or tablet with Bluetooth and Wi‑Fi
    • Small Phillips screwdriver and flat screwdriver or trim tool
    • Tape measure and pencil for marking mount position
    • Spirit level and suitable wall plugs/screws for your wall material
    • Optional: ladder and torch for ceiling or high installations
  • Applications:
    • Shelly mobile app (manufacturer app) on iOS or Android
    • Your device's operating system Bluetooth and Wi‑Fi settings panel

The following steps explain how to unpack, mount and connect the Shelly Touch Screen Wall Display and the Shelly H&T sensor. Capabilities and connectivity: the bundle provides a wall-mounted touchscreen control for monitoring and local control of connected smart devices, and a compact temperature and humidity sensor that provides real‑time readings. Connectivity is via Bluetooth and Wi‑Fi. Compatibility is not specified. Do not attempt wiring or alterations you are not qualified for.

  • Unpack and check contents: remove both devices and any mounting hardware from packaging. Verify the touchscreen display, the H&T sensor, USB or power accessories if supplied, screw set and quick start guides are present.
  • Choose locations: select an indoor location for the touchscreen where it is easily reachable and within Wi‑Fi coverage. For the H&T place the sensor where it will measure representative temperature/humidity (away from direct sunlight, heaters, drafts or kitchens). Ensure both are within Bluetooth range of your phone during setup.
  • Prepare mounting surface: use the spirit level and pencil to mark holes for the touchscreen backplate or bracket. Use appropriate wall plugs/screws for the wall material. If the touchscreen is designed to mount to a standard electrical backbox, ensure the box type is compatible (device-specific backbox compatibility is not specified).
  • Mount the touchscreen backplate: fix the bracket or backplate securely to the wall using the chosen fixings. Do not overtighten screws. Leave the plate secure and level.
  • Power considerations: the product listing does not specify the required power method. Before connecting any mains or wired power, consult the manufacturer guide included in the box for the exact power requirements and wiring instructions. If the touchscreen requires mains wiring you must engage a trained electrician to perform the installation; do not attempt mains wiring yourself.
  • Initial power on: follow the manufacturer guide to power the touchscreen. If the touchscreen boots, it will usually show a startup screen. For the H&T, if it uses a battery, install the battery following the guide; if it requires external power, follow the supplied instructions.
  • Enable phone Bluetooth and Wi‑Fi: on your smartphone or tablet enable Bluetooth and connect it to the 2.4 GHz Wi‑Fi network you intend to use. Have your Wi‑Fi SSID and password ready for provisioning.
  • Install Shelly app: download and install the Shelly mobile app on your phone/tablet. Open the app and create or sign in to your account if required by the app.
  • Add the touchscreen in the app: in the Shelly app choose the option to add a new device. Follow the on‑screen instructions to discover the display via Bluetooth. The app will typically prompt you to identify the device and then provision it onto your local Wi‑Fi network by entering your Wi‑Fi credentials.
  • Complete touchscreen setup: when provisioning succeeds, allow the device to connect to your Wi‑Fi. The touchscreen interface may display a local configuration wizard — follow on‑screen prompts to set language, time zone and initial control groups or rooms. Confirm that the touchscreen shows connected status in the app.
  • Add the Shelly H&T sensor: in the Shelly app choose to add another device. Start discovery via Bluetooth and follow prompts to provision the H&T onto the same Wi‑Fi network (or pair via Bluetooth if the device supports Bluetooth‑only operation). Complete any calibration or name the sensor within the app.
  • Verify readings and controls: in the app check the H&T reports temperature and humidity values. On the touchscreen verify the sensor or device tiles appear and that you can operate local controls (for example, tap to view sensor data or operate linked devices). If the touchscreen supports rules or scenes, configure them in the app per your needs.
  • Mount final devices: once network and app configuration is complete, attach the touchscreen to its backplate securely. Clip or screw on any decorative trim per the quick start guide. Place the H&T sensor in its chosen position (on a flat surface or wall mount) as recommended in the sensor guide.
  • Troubleshooting common issues: if a device fails to appear in the app, ensure Bluetooth is enabled and the device is in pairing mode (refer to the included quick start). Confirm your phone is connected to the correct Wi‑Fi frequency (many devices require 2.4 GHz). Restart the device and retry provisioning. If connectivity issues persist check the router and firewall settings.
  • Security and maintenance: keep the Shelly app and devices updated with firmware releases via the app. Use strong Wi‑Fi passwords and enable any manufacturer security features. Replace sensor batteries when indicated by the app.

Product UID: 10421571748167