Noerden SENSORI Smart Scales Setup Guide

Noerden SENSORI Smart Scales

  • Tools required:
    • Smartphone or tablet with Bluetooth and Wi-Fi and sufficient battery charge
    • Access to your Wi‑Fi network SSID and password (if you plan to use Wi‑Fi synchronisation)
    • Flat, hard floor area (tile or wood) and a soft cloth to clean the floor and scale surface
    • Batteries if not pre-installed — check the underside/battery compartment of the unit
  • Applications:
    • Noerden App (required for data synchronisation and storing measurement history)
    • Device settings: Bluetooth and Wi‑Fi enabled on your smartphone/tablet

Capabilities and connectivity (as provided):

  • Capabilities: digital weight measurement; stores measurement history for tracking; smart data synchronisation; suitable for household bathroom use.
  • Connectivity: Bluetooth & Wi‑Fi.
  • Compatibility: Noerden App.

Setup steps — follow these in order:

  • Unbox and inspect: remove any transit stickers or protective films from the weighing surface and the display area. Check the underside for a battery compartment and any quick-start notes.
  • Prepare the installation area: choose a flat, hard, level floor surface. Avoid carpet or uneven surfaces. Wipe the floor and the scale feet with a soft cloth so the scale sits stably.
  • Power the scale: insert batteries if they are not already fitted, following the polarity markings in the battery compartment. Close the compartment securely. If the product comes with pre-installed batteries, proceed to the next step.
  • Initial power-up and zeroing: place the scale on the chosen surface and press the power button if present, or step on briefly then step off to allow the display to return to zero. Wait for the display to show 0.0 (or the idle indicator) before attempting measurements.
  • Install the Noerden App: on your smartphone or tablet open your platform's app store, search for “Noerden” and install the official Noerden App. Grant permissions the App requests for Bluetooth (and location if the operating system requires it) to allow pairing.
  • Create or sign in to an account: open the Noerden App and either sign in or create a new account as prompted. Follow the in‑app instructions for basic profile setup (age, height, etc.) if requested — this assists history tracking but is optional if the App allows guest use.
  • Pairing via Bluetooth: with Bluetooth enabled on your phone, use the Noerden App to add a device. Follow the App’s prompts to discover and pair the SENSORI scale. Typical steps: select “Add device”, wait for the App to detect the scale, then confirm the device in the App. Keep your phone close to the scale during pairing.
  • Configure Wi‑Fi (optional): if you want cloud synchronisation or remote backup and the App offers Wi‑Fi setup, follow the App instructions to provide your Wi‑Fi SSID and password. Ensure your router is within range and that any network restrictions (guest network isolation, MAC filtering) will not prevent the scale from connecting. If the App does not prompt for Wi‑Fi, Wi‑Fi setup may be optional or not required.
  • Verify synchronisation and history: after pairing, perform a test measurement by standing on the scale with bare feet. Wait for the reading to stabilise, then step off. Open the Noerden App and confirm the measurement appears in the App history. Allow a short time for synchronisation if using Wi‑Fi.
  • Regular use recommendations: always place the scale on the same hard surface for consistent results; measure at the same time of day and with similar clothing for tracking; clean the sensors and surface with a soft, damp cloth and avoid abrasive cleaners.

Troubleshooting notes (brief):

  • If the scale does not power on, recheck battery orientation and battery condition and reseat the compartment cover.
  • If pairing fails, ensure Bluetooth is enabled, the Noerden App has necessary permissions, and move the phone within 1 metre of the scale during pairing. Restart the App and try again.
  • If Wi‑Fi setup fails, confirm the SSID and password are correct and that your router does not block new devices. Some routers use a 5 GHz-only network; if the App or scale require 2.4 GHz, switch to a compatible network.
  • If weight readings seem inconsistent, confirm the scale is on a flat hard floor and there is no wobble; re‑zero the scale by stepping on and off, and retry.

Notes and limitations: do not expose the scale to water immersion; follow safety and usage instructions in the supplied user manual. No high-voltage electrical work is required for typical setup; if you encounter any electrical installation beyond basic battery or Wi‑Fi configuration, consult a qualified technician.