Bold Smart Lock - SX Keyless Cylinder Smart Door Lock Setup Guide

Bold Smart Lock - SX Keyless Cylinder Smart Door Lock

Capabilities: keyless entry, enhanced security features, user access control.
Connectivity: not specified.

  • Tools required:
    • Phillips and flat-head screwdrivers
    • Tape measure and pencil
    • Drill and appropriate drill bits (for new installations)
    • Chisel and wood shims (if adjusting the frame or recess)
    • Allen keys or driver bits supplied with the lock
    • Small torch or flashlight
  • Applications:
    • Not specified

The following step-by-step walkthrough covers physical installation and initial checks. Do not attempt mains electrical work; this product is described as a keyless cylinder lock and no mains wiring is specified. If your installation involves wiring or integration with mains-powered systems, use a trained electrician or qualified installer.

  • Unpack and inspect: confirm all components are present—cylinder, retaining screw, cam/tailpiece, internal trim/cover, mechanical keys and any paperwork. If parts are missing, contact the supplier before proceeding.
  • Review the door and existing hardware: measure door thickness and the backset (distance from the door edge to centre of the cylinder). These dimensions determine whether the supplied cylinder/tailpiece requires adjustment.
  • Remove the existing cylinder: with the door open, locate and remove the fixing screw on the face of the door edge, then slide the old cylinder out while operating the key slightly to align the cam if required.
  • Prepare the new cylinder: confirm the tailpiece/cam orientation matches your door handing. If the cylinder includes an adjustable tailpiece, set it to the correct length for your door thickness following the printed instructions supplied with the product.
  • Fit the cylinder into the door: insert the cylinder into the lock case so the cam engages correctly with the latch mechanism. Hold the cylinder in position and install the retaining screw. Tighten the screw evenly—do not overtighten as this can distort the cylinder and impede operation.
  • Check mechanical operation: with the door open, test the mechanical key and thumbturn (if supplied) several times to ensure smooth locking and unlocking. The bolt or latch should operate without binding.
  • Install internal trim and covers: fit any internal plates or covers provided, ensuring no components compress wiring or the tailpiece. If a battery compartment is present and the lock is battery powered, install batteries now following the manufacturer's polarity instructions; if battery use is not stated, skip battery steps and follow printed guidance.
  • Initial programming and user setup: this product description does not specify connectivity or a companion application. If the lock supports user codes, RFID tags or mobile credentials, programme these features using the printed quick-start guide supplied with the lock. If programming requires an app or wireless connection and that is not provided in the product paperwork, treat connectivity as not specified and consult the manufacturer's documentation.
  • Functional tests: test every access method available—mechanical keys, keyless entry method(s) supplied, and internal thumbturn—at least 10 cycles to confirm reliability. Test from both sides of the door and with the door both open and closed.
  • Adjust striker alignment if required: if the deadbolt or latch does not enter the strike plate smoothly, loosen the strike plate screws, reposition the plate or enlarge the recess slightly and retest until operation is smooth.
  • Secure all fixings: re-check and tighten screws for the cylinder and any trim plates. Avoid overtightening which can cause binding or damage plastic components.
  • Record settings: note any administrator codes, user IDs and the number of mechanical keys supplied. Store spare keys and recorded codes in a secure location.
  • Troubleshooting and professional assistance: if the cylinder sticks, the key does not turn smoothly, programming steps are unclear, or if you require integration with other systems, stop and consult the supplied manual or a professional locksmith or installer. Do not attempt mains electrical work yourself; engage a trained electrician for any mains or wiring tasks.

Final advice: this guide covers physical installation and basic commissioning using the information supplied with the product title and description. For model-specific programming, battery types, wireless pairing or app installation follow the manufacturer's detailed instructions included with your unit.