Bold Elite SX Keyless Cylinder Smart Door Lock Setup Guide

Bold Elite SX Keyless Cylinder Smart Door Lock

  • Tools required:
    • Phillips screwdriver (suitable size for supplied screws)
    • Flat-head screwdriver
    • Tape measure and pencil
    • Safety glasses
  • Applications:
    • Bold App (as specified)
    • Bluetooth-enabled smartphone (iOS or Android) with Bluetooth turned on

• Before you begin: Unpack the unit and confirm the package contains the cylinder and installation hardware. Read the supplied quick-start manual for any product-specific diagrams. The lock’s stated capabilities: keyless entry, PIN code access, remote operation, access scheduling and tamper alert. Connectivity is Bluetooth; the Bold App is required for configuration.

• Step 1 — Prepare the door: Confirm your door uses a standard euro-style cylinder or compatible cylinder format as implied by the product description. Measure the door thickness and backset to verify the supplied hardware fits; if uncertain, stop and check the product manual or consult a professional installer.
• Step 2 — Remove existing cylinder: With the door open, unscrew the fixing screw on the edge of the door that secures the cylinder. Turn the existing key slightly to align the cam and withdraw the old cylinder. Keep screws and fittings separate for re-use or replacement.
• Step 3 — Fit the Bold Elite SX cylinder: Insert the Bold Elite SX cylinder into the door with the cam aligned. Ensure the tailpiece sits squarely in the mortice; do not force. Refit and tighten the fixing screw so the cylinder is held firmly but not over-tightened. Check the cylinder rotates freely with the thumbturn or supplied mechanical control.
• Step 4 — Power and batteries: The product description does not specify battery type. Install batteries only as directed in the supplied manual. Do not expose batteries to heat or water. If the manual instructs, connect any internal battery pack or battery compartment cover and ensure correct polarity.
• Step 5 — Initial checks: With the door open, test mechanical locking and unlocking several times to confirm the cylinder and latch operate smoothly. If there is binding, loosen the fixing screw, realign the cylinder and re-tighten.
• Step 6 — App setup and Bluetooth pairing: On your smartphone enable Bluetooth. Install and open the Bold App. Create or sign in to your Bold account if required. In the app, select the option to add a new device and follow the on-screen prompts; typically this will request permission to use Bluetooth and may ask you to place the phone within close range of the lock. Follow any in-app instructions to complete pairing. If pairing fails, ensure batteries are installed and phone Bluetooth is active and that you are within 1–2 metres of the lock.
• Step 7 — Configure access methods: Using the Bold App, create an administrative account for the lock and set an initial administrator PIN. Add additional PIN codes for users as required. Confirm each code by testing it at the lock’s keypad or entry method. The product supports time-based access restrictions; use the app’s scheduling features to assign allowed hours or days for each PIN or user as required.
• Step 8 — Enable tamper alerts and notifications: In the Bold App enable tamper detection and notification preferences if available. Test alerts by following the manufacturer instructions (for example, attempting an incorrect PIN entry) and confirm the app shows an alert.
• Step 9 — Test remote operation and daily use: The product description lists remote operation and Bluetooth connectivity. Test unlocking and locking from the Bold App while your phone is within Bluetooth range. Verify scheduled access, temporary PINs and that tamper alerts are received as configured.
• Final checks and handover: Ensure all screws are secure, battery compartments are closed, and the door latches smoothly with the cylinder installed. Record administrator credentials in a secure location. Provide end users with instructions on creating their PINs in the Bold App and how to respond to tamper alerts.
• Troubleshooting (concise): If the lock does not respond, check batteries and Bluetooth permissions in your phone. If mechanical operation is stiff, verify cylinder alignment and that the fixing screw is not over-tightened. If the Bold App cannot find the device, ensure the phone is within Bluetooth range and try restarting Bluetooth or the phone. For hardware fit issues or complex door preparations, consult the supplied manual or a qualified locksmith.