Bold Elite SX Keyless Cylinder Smart Door Lock Setup Guide

Bold Elite SX Keyless Cylinder Smart Door Lock

  • Tools required:
    • Phillips screwdriver (cross-head)
    • Flat-head screwdriver
    • Tape measure and pencil
    • Allen key / hex key (if supplied in the installation pack)
    • Batteries (type not specified; check the package contents)
    • Clean cloth for finishing
  • Applications:
    • Smartphone with Bluetooth capability
    • Bold App (platforms not specified)

Please read the printed Quick Start Guide included with the unit before beginning. The steps below describe the typical physical installation and app commissioning workflow only; follow the product manual for any lock-specific procedures that deviate from this guide.

  • 1. Verify contents: unpack the box and confirm the Bold Elite SX unit, all mounting screws and any installation templates or spacers are present. The package is stated to include complete installation hardware.
  • 2. Inspect the door and existing cylinder: confirm the door has a standard cylinder cut-out and that the existing cylinder can be removed without altering the door. The product description indicates the cylinder mechanism fits standard door installations.
  • 3. Remove the existing cylinder: with the door open, unscrew the fixing screw on the edge of the door, turn key to align cam if present, and withdraw the old cylinder following the existing lock manufacturer’s procedure.
  • 4. Prepare the Bold Elite SX: check orientation of the cam and any supplied spacers against the door thickness. Use the supplied installation template or follow the manual to position the unit correctly. Do not force the cylinder if it will not seat smoothly.
  • 5. Insert and secure the cylinder: slide the Bold Elite SX cylinder into the door cut-out, align the cam, and fit the fixing screw. Tighten screws until secure but avoid over-tightening which can bind the mechanism.
  • 6. Fit interior trim and verify mechanical operation: attach any interior escutcheon or thumbturn and tighten the mounting screws. Operate the thumbturn and the external key position (if provided) to confirm smooth mechanical locking and unlocking with the door open.
  • 7. Install power source if required: if the unit requires batteries, install the battery pack as instructed in the manual. Battery type is not specified here — check the included documentation or pack labelling. Ensure battery contacts are correct and any battery compartment cover is secured.
  • 8. Initial app preparation: enable Bluetooth on your smartphone. Install the Bold App from your device’s app store; platform support is not specified so confirm availability for your device. Create or sign in to your account in the Bold App if required.
  • 9. Commission the lock in the Bold App: open the Bold App and follow the in-app prompts to add a new device. Typical steps are: select Add Device, choose the Bold Elite SX model if listed, put the lock into pairing mode according to the Quick Start Guide, and approve the Bluetooth pairing on your phone. If the app requests device information, enter it exactly as shown on the product label or in the manual.
  • 10. Set administrator credentials and secure settings: within the Bold App create an administrator PIN or passcode as prompted. Register an owner/administrator account, then configure primary access settings such as user PINs, time-based access schedules and tamper alert preferences. The product supports PIN code access, access scheduling and tamper alerting as described in the product summary.
  • 11. Test all access methods: with the door open, test PIN entry on the lock, unlock/lock via the Bold App over Bluetooth, and verify scheduled access by creating a short-duration schedule for a test PIN. Confirm tamper detection behaviour by following the manual’s safe test method or checking the app’s event log for tamper notifications.
  • 12. Verify secure fit and final checks: ensure all screws and covers are secure, the cylinder does not move within the door, and the mechanism operates smoothly when the door is closed and the latch/bolt engages. Confirm the app sends notifications for lock events if notifications have been enabled.
  • 13. Backup and housekeeping: record administrator PINs and retain the Quick Start Guide and any emergency mechanical keys if provided. If the unit supports remote operation via the Bold App, review the app’s guidance for remote access, noting that available remote features may depend on the phone, app version and network setup.
  • 14. Troubleshooting: if pairing fails, ensure Bluetooth is enabled, move the phone closer to the lock, and restart the Bold App. If the cylinder binds mechanically, loosen mounting screws slightly and realign before retightening. For persistent mechanical or electronic faults, follow the manufacturer’s troubleshooting section in the manual or contact a trained installer.

Notes: Connectivity is specified as Bluetooth. Compatibility with the Bold App is specified in the product details. Battery type and certain pairing specifics are not specified in the product listing; always consult the included manual for exact battery, wiring (if applicable) and device-specific pairing steps. This guide does not cover mains electrical work or high-voltage connections; if the installation requires wiring to mains power (not specified), that portion should be carried out by a trained electrician.